What are the key points to keep in mind for the daily maintenance and care of a wet wipe machine?

Author:

Here are the key points for daily care and maintenance of the wet wipe dispenser: (1) The wet wipe dispenser should be placed on a dry, clean, and sturdy, level surface, with at least 10 cm of clearance from the edge of the table. (2) Before connecting the dispenser to a 220V mains power supply, always verify that the product’s rated voltage matches the local voltage. (3) Never allow children to touch the machine without adult supervision. (4) If the dispenser will remain unused for an extended period, unplug the power cord from the outlet to prevent accidental operation and potential damage. (5) When moving the dispenser, always lift it upright and carry it forward—never turn it upside down—to avoid any residual liquid inside the machine.

Wet Wipe Machine Things to keep in mind for daily maintenance and upkeep:

(1) The wet wipe dispenser should be placed on a dry, clean, and sturdy, level tabletop, with at least 10 cm of clearance from the table edge.

(2) The wet wipe machine requires a 220V power supply (mains electricity). Before connecting, please verify that the product’s rated voltage matches the local voltage.

(3) Children must never be allowed to touch the machine without adult supervision.

(4) When the wet wipe dispenser is not in use for an extended period, please unplug the power cord from the outlet to prevent accidental operation and potential adverse effects.

(5) When moving the wet wipe machine, always slide it forward as much as possible—never turn it upside down—to prevent any remaining water inside from spilling out and potentially scalding your body.

(6) When cleaning the machine, do not directly rinse or soak it.

(7) If the wet wipe dispenser has not been used for an extended period, please thoroughly clean the inside of the machine with hot water before using it again.

(8) If your machine encounters a quality issue you can’t resolve, be sure to contact customer service or take it to an authorized service center for repair. Do not attempt to disassemble or repair the machine yourself, as this could lead to electrical leakage or the risk of electric shock.

(9) Please do not move the machine body while it is operating, and do not disassemble or reassemble any components during operation.

(10) Please avoid subjecting this product to severe impacts or drops.

(11) Do not block the ventilation holes while making wet wipes.

(12) When disassembling the machine for cleaning or maintenance, first unplug the power cord from the electrical outlet.

(13) Do not place your hands or any hard objects inside the machine while it is operating, and make sure the machine is placed on a level surface.

(14) After cleaning or maintenance and before reinstalling, make sure to securely place the mixing container, residue bin, filter mesh, protective cover, wet wipe tray, and cleaning plate back into position, and firmly fasten the top lid and pressure rod.

(15) While making wet wipes, do not touch the emergency switch on the side of the mask tray—once the wet wipes are ready, the mask tray will automatically pop open, so there’s no need to do it manually. This switch is intended for use only in case of a malfunction or during maintenance, when you need to manually open the wet wipe tray.

(16) If the power suddenly goes off after you press the start button, wait until the power is restored. Then, add purified water into the filling port until the indicator light turns red, and stop adding water. Finally, press the start button again, and the machine will resume the heating process to produce wet wipes. However, if the power outage lasts too long, it’s recommended not to use these wet wipes.

Wet Wipe Machine