The manufacturing process of the facial mask packaging machine—this innovative device replaces manual folding of masks, offering high efficiency while ensuring product hygiene. By combining and refining traditional manual folding techniques with advanced mechanical principles, the machine seamlessly takes over the labor-intensive task. Let’s now explore how this cutting-edge facial mask packaging technology works.
Before packaging, face masks must be folded—currently, this folding process is almost entirely done by hand, a method widely adopted by small to medium-sized businesses. However, manual folding inevitably leads to contamination of the masks, compromising their cleanliness and ultimately affecting their effectiveness during use. On the other hand, since employees vary in skill level and dexterity, uneven folding often results in creases or wrinkles on the masks. This makes it challenging for companies to maintain consistent product quality. Moreover, with rising labor costs across society, production expenses continue to climb, creating significant bottlenecks that hinder business growth and development.
Key elements for mastering packaging machine skills:
Facial Mask Packaging Machine The purpose of this utility model is to address the shortcomings of existing technologies by providing a mask packaging machine that features excellent folding performance, low equipment manufacturing costs, smooth operation, seamless motion, high production efficiency, and effective control over product quality and output capacity. Additionally, it minimizes manual contamination of masks, significantly enhancing mask cleanliness during the packaging process.
Mask Packaging Machine Skill Plan:
A folded tissue mask assembly comprising a compacted transport mechanism, an edge-forming die unit, a guiding adjustment base, a folding-edge die, a follower-transport mechanism, a shaped-wheel axle assembly, sprockets, baseplate connecting blocks, left and right main machine baseplates, the working conveyor belt, tension rollers, a conveyor-belt tension frame, drive gears, a mask roller partition, non-powered rollers, rubber roller shafts, a primary motion pulley, O-rings, small O-belts, driven pulleys, secondary motion pulleys, auxiliary machine-linked sprockets, and the overall machine frame—characterized by:
The machine is equipped with an edge-forming die assembly positioned above it. At the left end of the edge-forming die assembly, a rolling and conveying mechanism is installed. Below this conveying mechanism, a mask roller baffle is mounted on the machine bed. A transmission gear is placed between the mask roller baffle and the rolling and conveying mechanism, situated on the left side of the conveyor's end. This transmission gear is connected via the machine bed to a secondary driven sprocket located on the opposite side of the machine.
On the right side of the edge-forming die assembly, a die-adjustment base is attached, linking the right end of the assembly to a non-powered roller also mounted on the machine bed. Finally, a die-following conveying mechanism is installed at the right end of the die-adjustment base, with symmetrical edge-folding dies positioned between the die-adjustment base and the die-following conveyor.
The aforementioned follower guide assembly features two driven pulleys on its front inner side, with an O-ring small belt fitted around both pulleys. On the front outer side of the guide assembly, there is a driven belt pulley, while the machine’s right-end front section includes a main drive pulley. The driven pulley and the main drive pulley are connected via an O-ring belt. Additionally, a transmission gear is mounted at the rear right end of the machine, passing through the machine to engage with the main drive pulley. Above the transmission gear sits a cam-type shaft mechanism, positioned at the rear end of the follower guide assembly. On both sides inside the machine’s right-end frame, symmetrical rubber roller shafts are installed.
Underneath the machine, an operational conveyor belt is positioned, with a belt tensioning frame mounted between the belt and the machine frame. This tensioning frame is equipped with a tensioning pulley. Finally, chain sprockets are installed at the left and right ends of the machine’s front section, and both ends of the conveyor belt are securely connected to these sprockets on the machine’s left and right sides.
The described substrate connecting block is located at the bottom corners of the machine.
Wenzhou Ruirun Machinery Co., Ltd. is a specialized manufacturer of wet tissue packaging machines, four-side seal wet tissue packers, facial mask packaging machines, mask-making machines, eye mask packaging machines, fully automatic wet tissue packers, mask folding machines, mask filling machines, hose filling and sealing machines, alcohol cotton pad machines, mask folding equipment, fully automatic packing machines, aerated block packing machines, wet tissue production lines, facial mask production systems, and related supporting equipment suppliers.
