How to properly use a mask machine to manufacture masks?

Author:

A facial mask machine allows you to DIY masks tailored specifically for your skin using ingredients like fruits, vegetables, milk, and more. These masks deeply hydrate and provide intense nourishment—plus, they’re entirely natural, with no added chemicals, ensuring they won’t irritate or harm your skin. But how exactly does the mask machine create these nourishing concoctions? Here’s a step-by-step guide: 1. First, rotate the pressing rod to the right until it reaches position III, then lift it upward. Once you remove the rod, the juice chamber will be revealed. Next, carefully place pre-prepared small pieces of fruits or vegetables into the chamber—remember to use only the fleshy part of the fruit, removing seeds and peels before cutting them into bite-sized chunks. 2. After placing the ingredients, slide the pressing rod back into the machine and turn it counterclockwise from position III to position II.

Mask machine This device allows you to DIY face masks tailored specifically for your skin, using ingredients like fruits, vegetables, and milk. These masks deeply hydrate and provide intense nourishment—plus, they’re entirely natural, with no added chemicals, ensuring they won’t irritate or cause any adverse reactions on your skin. But how exactly does this mask-making machine work? And what’s the simple, step-by-step process for creating your own custom masks?

Mask-making machinery

　　1. Turn the pressing rod to the right into position III, then lift it upward. Once you remove the rod, the juicing chamber will be revealed. Next, carefully place the pre-prepared small pieces of fruits and vegetables into the juicing chamber—remember to use only the fleshy parts of the fruit, after removing the seeds and peels and cutting them into bite-sized chunks.

　　2. Place the pressing rod back into the machine and turn it counterclockwise from position III to position II.

　　3. Press the front touch point of the crescent-shaped cover, then gently lift the raised cover upward to open it.

　　4. After opening the front cover, carefully pour the prepared purified water into the filling port on the right end. Once the tank is full, the indicator light will change from a flashing green to a steady red, accompanied by three audible prompts.

　　5. Next, add 1 snail-derived multi-active peptide pellet through the filling port on the left end. Then, fold the front lid downward to secure it in place.

　　6. Tap the start button, and once the indicator light turns steadily blue, the machine will automatically begin operating. Please wait patiently for a few minutes.

　　7. Once the mask is fully manufactured, the mask tray will automatically pop out, and the machine will activate a prompt indicator light that turns blue and starts flashing. After the tray pops open, carefully remove it and place it in a cool, shaded area to allow the mask to cool and set properly. Once the mask has cooled and taken shape, gently lift it out of the tray using both hands—and you're ready to use it! (Note: Be sure to pay attention to the audible signal; remove the tray promptly, as the sound will stop once the tray is ejected.)

Mask machine