What are the technical features of the swab packing machine?

What are the technical features of the swab packing machine?

The competition of food packaging machinery is becoming increasingly fierce. In the future, food packaging machinery will cooperate with industrial automation to promote the overall level of packaging equipment and develop multi-functional, high-efficiency and low-consumption food packaging equipment. So what are the technical characteristics of the swab packaging machine?

What are the technical characteristics of the swab packaging machine?

1. Feeding and discharging method: turn forward and turn right.

2. The compression vacuum packaging machine adopts the hot box fixed instantaneous heating method to save energy.

3. Special electric heating device, uniform heat distribution.

4. Small body and small footprint.

5. Suitable for small batch production and medium production.

6. Stable and reliable performance.

What are the faults and solutions of the swab packaging machine?

1. The cause of the fuselage failure

(1) Circuit failure.

(2) The heating tube is faulty.

(3) The fuse is damaged.

    solution

(1) Check the wiring of the packaging machine, find the fault and repair the wiring.

(2) If the heating tube of the packaging machine fails, the simple solution is to replace the heating tube directly.

(3) When the fuse of the packaging machine is damaged, it can be replaced in time.

2. Reasons for abnormal temperature

(1) The temperature regulator fails.

(2) The thermocouple wire is short-circuited.

    solution

(1) When the temperature regulator fails, it is recommended to replace the temperature regulator.

(2) When the thermocouple wire is short-circuited, it is recommended to replace the thermocouple.

(3) The paper feed motor does not work properly.

The reason for the failure of the feeding motor

(1) The paper feed lever is stuck.

(2) The startup capacitor fails.

(3) The power board and the fuse are out of order.

(4) The paper feed proximity switch is faulty.

    solution

(1) When the paper feed lever is stuck, check the cause of the paper jam and solve it.

(2) When the starting capacitor fails, the starting capacitor needs to be replaced in time.

(3) When the power board and the fuse are faulty, the circuit of the power board should be repaired in time, and the fuse of the packaging machine should be replaced.

3. Reasons for the failure of the bag pulling motor

(1) The control panel is faulty.

(2) Line failure.

(3) The stepper motor driver is faulty.

(4) The bag-pulling proximity switch is damaged, or the bag-feeding cam of the packaging machine is too far away.

    solution

(1) When the control panel fails, the control panel of the packaging machine needs to be replaced.

(2) When the wiring fails, check the wiring of the packaging machine and repair it in time.

(3) When the stepper motor driver fails, the stepper motor driver of the packaging machine needs to be replaced.

(4) When the bag-pulling proximity switch is damaged, the bag-pulling proximity switch of the packaging machine needs to be replaced.

4. Reasons why the packaging materials are easily damaged

(1) Paper feed proximity switch failure

(2) The material is irregular and burrs appear

(3) The motor circuit at the feeding position is faulty.

    solution

(1) When the paper feed proximity switch fails, the paper feed proximity switch of the packaging machine needs to be replaced.

(2) The packaging materials are irregular, and when burrs appear, the unqualified packaging materials should be trimmed off.

(3) When the motor circuit of the paper feeding position fails, check and repair the paper feeding motor circuit of the packaging machine in time.

5. The liquid packaging machine is unstable in feeding

(1) The position of the cock is not installed correctly.

(2) The pipeline is blocked.

(3) The position of the cock rocker is loose.

    solution

(1) When the position of the cock is not installed correctly, it is necessary to adjust the position of the cock of the packaging machine appropriately.

(2) When the pipeline is blocked, it is necessary to clear the pipeline of the packaging machine in time to ensure that the pipeline is unobstructed.

(3) When the position of the cock rocker is loose, it is necessary to tighten the screws around the cock rocker of the packaging machine.